GoBob cattle guards are made from 100% NEW STEEL! We NEVER use "used" pipe in our cattle guards which means they will outlast you and me put together! AND they are HEEAVEE! They are built to stand up to semi's, cement trucks and drilling rigs.

Here's how we build them;  First we start out with 2 skids of (new)heavy 6 inch pipe. We come across that with heavy 5 1/2" OD pipe. The top runners are a heavy 2 1/2" OD or 2 7/8" OD. We then cap off the ends with 3x3 angle to keep the critters out and finish off the front and back with a steel skirt to keep your fill out from under the cattle guard. It all adds up to the best dang cattle guard you can buy. Does it cost more than a concrete cattle guard? Well duh! But you will replace that concrete cattle guard 5 or 6 times before you even think about replacing our STEEL cattle guard.

We will be happy to build a cattle guard any size you want, but our standard sizes are listed below.

Vertically flush setting	Front and rear skirting

Standard sizes are:

12 ft. x 6 ft. 8 in. (2234 lb.)

16 ft. x 6 ft. 8 in. (2912 lb.)

20 ft. x 6 ft. 8 in. (3459 lb.)

By golly, your cattle guards are CADILLAC!
- Loren S. Basler
  Bartlesville, OK.

    So is your installation, Loren! - GoBob